Water purification information

Introduction of various indexes of reverse osmosis membrane

Views : 85244
Update time : 2021-09-27 17:47:07
1. Desalination rate and salt permeability of reverse osmosis membrane
reverse osmosis membrane

Salt permeability = product water concentration / influent water concentration × 100%

Desalination rate = (1-salt content of product water / salt content of influent water) × 100%

Salt penetration rate = 100%-desalination rate

The desalination rate of the membrane element is determined when it is manufactured and formed. The desalination rate depends on the density of the ultra-thin desalination layer on the surface of the membrane element. The denser the desalination layer, the higher the desalination rate and the lower the water production.

The desalination rate of different substances by reverse osmosis is mainly determined by the structure and molecular weight of the substance. The desalination rate of high-valent ions and complex monovalent ions can exceed 99%, and the desalination rate of monovalent ions such as sodium ions, potassium ions, and chloride ions is slightly lower. , But it also exceeds 98%; the removal rate of organics with a molecular weight greater than 100 can also exceed 98%, but the removal rate of organics with a molecular weight of less than 100 is low.

2. Water production of reverse osmosis membrane
reverse osmosis membrane
Water production-refers to the water production capacity of the reverse osmosis system, that is, the amount of water permeating the membrane per unit time, usually expressed in tons/hour or gallons/day.

Permeation flow rate-is also an important indicator of the water production of reverse osmosis membrane elements. Refers to the flow rate of permeate per unit membrane area, usually expressed in gallons per square foot per day (GFD). Too high permeate flow rate will cause the water velocity perpendicular to the membrane surface to increase, which will aggravate membrane fouling.

3. Recovery rate of reverse osmosis membrane

Recovery rate-refers to the percentage of feed water converted into product water or permeate in the membrane system. Depends on the pretreatment influent water quality and water requirements. The recovery rate of the membrane system has been determined at the time of design,

Recovery rate = (product water flow/influent flow) × 100%

For large RO systems, the recovery rate is usually limited by the tendency of insoluble salt to foul, that is, by the maximum concentration of concentrated water; for small RO systems, the recovery rate is usually less than 30% to 50%. When the recovery rate is low, the RO device can operate safely without controlling the solubility of insoluble salts. Cost is usually not a priority for small RO systems.
Related News
Read More >>
PP Filter Cartridge Selection and Replacement Precautions PP Filter Cartridge Selection and Replacement Precautions
Oct .24.2024
Most of the household water purifier or water purifier are used in the first level of the filter are PP filter, the first level of the filter will not only directly affect the water quality, will also affect the back of the three or four filtration effect and the life of the filter, so the quality of the PP filter for the water purifier is particularly important.
Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element? Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element?
Oct .24.2024
PP cartridge can remove a small amount of solid particles in the liquid or air can protect the normal operation of the equipment or clean air, when the fluid enters the cartridge with a certain specification of the filter, the impurities are blocked, and the clean flow through the cartridge outflow, the cartridge is mainly used for filtration.
Do water purifiers actually work? Does it work? Does it work? Do water purifiers actually work? Does it work? Does it work?
Oct .23.2024
Is a water purifier actually useful? Is it useful? Is it useful? Let me tell you, useful to burst!
Professionals also say that in our current drinking water environment, water purifier is a little hero:
Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning? Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning?
Oct .23.2024
Reverse osmosis system design will have a certain degree of surplus, to ensure that in the emergency time is not because of the reverse osmosis system of water production or desalination rate drop, reverse osmosis system differential pressure rise and make the water supply is not enough to cause a threat to the safety of the production, but in fact it is also because of the existence of these surplus makes the hidden faults are sometimes not able to show in time, so that ultimately may be evolved into reverse osmosis membrane Heavy contamination of reverse osmosis membrane elements.